Meguiar’s Car Wash Plus+ is one of our newest and most-exciting products available right now. Put simply, it’s a fast and easy way to wash your car… but it does MUCH more than simply clean your paint. Wash Plus+ actively removes contaminants and swirl marks while you clean! There’s no careful mixing or repeat trips with the bucket; simply apply Car Wash Plus+ directly to your wash mitt and away you go.

How does it work? Car Wash Plus+ features a 100% active formula which works similar to both a clay bar and compound, stripping paintwork of contaminants while polishing swirl marks as you clean thanks to its abrasive nature. Best of all, it couldn’t be easier to use. So much so, we figured what better way to prove it than with a helpful how to guide? So grab a cuppa, sit back and see how quickly and easily you can overhaul your paintwork in 3 easy steps…

Step 1: Water Rinse – Exactly as the name suggests, it’s essential to hose down as many loose contaminants as possible. Done? Let’s move on.

Step 2: Load the Wash Mitt – You’ll want to make sure the Microfibre Wash Mitt is thoroughly wet (either using a hose or wash bucket) before applying a ribbon of Car Wash Plus+ onto the mitt. Work from the top of the car down, going over a panel at a time.

Step 3: Rinse Off – Simply rinse off each panel immediately after you’ve finished going over it with the Wash Mitt. Congratulations… you’re done! Stubborn bugs or scuff marks still on the panel? Simply go over it once again to gently polish the marks away.

NOTE: Meguiar’s Car Wash Plus+ will not only strip contaminants including dirt, tar and grime, but also any wax currently applied to your paintwork.